Custom Silicone Food Storage & Snack Bags – Leak‑Proof, BPA‑Free, Reusable
- Model
- BH-parts
Item specifics
- Product Name
- Silicone Snack Bags
- Material
- Silicone
- Color
- Pink,Custom
- Shape
- Custom
- Feature
- Leak‑Proof, BPA‑Free, Reusable
- Application
- Food Storage & Snack
- Sales Method
- Molded Custom
- Consultation Email
- Suey@fromrubber.com
Review
Description
Two silicone snack bags can be moulded from the same 60 Shore A compound and still behave differently in the first week: one carries soup through a dropped bag, the other weeps along the zip rail as soon as the pouch is squeezed. The variable that separates them is not the durometer on the compound sheet. It is the closure geometry, the cure system, and how the film behaves where the bag folds. Those three items are what we quote against, and what this page documents. Five colours from one tool set. Colour is a masterbatch decision; the geometry is not. Translucent compound makes the wall visible. The fold above the flange is where hinge whitening appears first. Field returns cluster into five patterns. Each one traces back to a drawing decision, not to a material batch. The ranges below are what we quote from when a new mould is opened. Final values come from the compound datasheet and the test protocol agreed at T1; they are not measured results for an existing part. These ranges describe design intent for a new mould. They are not warranted performance figures: the approved drawing and the compound datasheet govern the delivered part. For the sealing side of the same problem, our note on silicone gaskets for food containers covers land width and lid preload in more depth. Buyers comparing formats also review stretchable silicone storage lids, which use a different seal principle again. Stand-up pouches: the gusset radius, not the compound, decides whether the pouch still stands when full. Cup and pouch formats share a compound family, but not the same seal land or the same cycle test. The same sequence applies whether the format is a pouch, a cup or a container with a slotted lid. Not always, but it is the safer default. Peroxide cure can pass the same migration limits and costs less, yet its decomposition byproducts are the usual explanation when a buyer reports a rubber taste in fatty food. If the bag will hold oil-based food, or will be used by children, specify addition cure. Most 500 ml pouches we tool sit at 1.0 - 1.5 mm on the side wall, with the gusset slightly thicker. Thinner walls fold more easily but slump when filled and tear at the gusset corner; thicker walls stand better and consume more compound per unit. A moulded-in deboss lasts far longer than ink. Screen print is workable for multi-colour artwork if it is post-baked, but abrasion at the fold and around the rail is where it disappears first. We usually quote deboss for the primary mark and ink only for secondary artwork. Yes. The compound is supported through an FDA 21 CFR 177.2600 and LFGB route, and migration testing is carried out by a third-party laboratory per compound rather than per shipment. The report is issued with the sample submission so it can be filed before retail approval. We return a DFM note on wall thickness, gusset radius and rail interference, with a material shortlist and a tooling quote. STEP, IGES, DXF or PDF drawings all work.The Leak Rating Is Decided by the Closure, Not by the Silicone


Where these products actually fail in service
Specification starting points
Parameter Stand-up pouch Snack cup or container Why it is set this way Wall or film thickness 1.0 - 1.5 mm side wall, gusset +0.2 mm 1.2 - 2.0 mm body Below 1.0 mm the pouch slumps when filled; above 2 mm it stops folding cleanly Hardness 55 - 70 Shore A 50 - 65 Shore A Softer compound seals at lower force but loses dimensional stability in a hot dishwasher Closure Press-to-close rail, slider, or roll-top with clip Slotted flexible lid, screw lid, or snap lid Every closure style needs its own sealing land and its own cycle test Dimensional tolerance ISO 3302-1 class M2 ISO 3302-1 class M2 Tighter classes are quoted per feature, not per part Seal verification 24 h inverted fill plus manual squeeze 30 min inverted shake Fixed before tooling, so the first sample is judged by the same test as production Service temperature -40 to +220 C, compound dependent -40 to +220 C, compound dependent Confirm against the actual datasheet; repeated dishwasher cycles age the compound Food-contact documents FDA 21 CFR 177.2600, LFGB FDA 21 CFR 177.2600, LFGB Third-party migration report per compound, not per shipment Branding Moulded-in deboss, or post-baked screen print Moulded-in deboss, or post-baked screen print Deboss survives washing best; ink is for multi-colour artwork How the tool and the batch are controlled


What we need to quote, and what comes back
From brief to batch in five steps
Questions buyers ask before tooling
Is platinum-cure silicone necessary for a food bag?
What wall thickness should a 500 ml stand-up pouch use?
Will the logo survive the dishwasher?
Do you supply food-contact documentation?
Send a sample or a fill volume














